Rosche Anti-Bacterial Surface Wipes Light 6 Pack – 300 Sheets per Roll with Reusable Container

Product Description

Rosche Anti-Bacterial Surface Wipes Light provide a practical bulk-cleaning solution for homes, offices, workshops, hospitality venues, education facilities, bathrooms and other frequently used environments. This value bundle contains six refill rolls, with 300 pre-moistened wipes on each roll, providing a total of 1,800 individual surface wipes together with a reusable dispensing container.

Each wipe measures 150 mm × 180 mm, providing a convenient size for everyday cleaning of benches, tables, counters, door handles, phones, office equipment, bathroom fixtures and other compatible hard surfaces. The light-grade construction makes the wipes economical for frequent use while providing sufficient coverage for general wiping and surface-hygiene tasks.

The term “Light” refers to the wipe grade and construction. It does not mean that the antibacterial solution is diluted, that the wipes contain fewer sheets or that they are intended only for lightly soiled areas. Each refill roll contains 300 wipes and uses the same convenient 150 × 180 mm sheet dimensions stated for Rosche product code 8907.

The pre-moistened format eliminates the need to prepare a separate spray bottle and cleaning cloth for routine surface wiping. Each sheet is dispensed from the reusable container, used on the required surface and placed in general waste after use. The wipes must not be flushed down toilets.

The included reusable container helps protect the roll from dirt and reduces moisture loss between uses. Keeping the container properly closed is important because prolonged exposure to air can cause the remaining wipes to dry out and reduce their cleaning effectiveness.

Rosche Anti-Bacterial Surface Wipes are intended for surface cleaning. They are not personal cleansing wipes, baby wipes, hand sanitising wipes, medical-device wipes or a substitute for correct handwashing.

The manufacturer promotes the wipes for antibacterial surface cleaning and germ reduction. Users requiring a specific disinfection standard, organism claim or contact time should follow the current product label and confirm that the stated performance is appropriate for their workplace, industry and cleaning procedure.

Product Specifications

• Brand: Rosche
• Product range: Visper
• Product type: Pre-moistened anti-bacterial surface wipes
• Manufacturer product code: 8907
• Wipe grade: Light
• Quantity per refill roll: 300 wipes
• Number of refill rolls: 6
• Total wipe quantity: 1,800 wipes
• Individual sheet size: 150 mm × 180 mm
• Bundle inclusion: One reusable dispensing container
• Wipe format: Continuous dispensing roll
• Application: Cleaning compatible hard surfaces
• Product condition: Ready to use
• Dilution: No dilution required
• Reusability: Container is reusable; wipes are single-use
• Dispenser compatibility: Compatible with the applicable Rosche wet-wipe dispensing system
• Rosche dispenser reference: 5405
• Primary users: Commercial cleaners, offices, workshops, hospitality venues, schools and households
• Disposal: Place used wipes in general waste
• Flushability: Do not flush
• Personal use: Not intended as a hand, face or body wipe
• Medical use: No hospital-grade or medical-device claim should be assumed
• Food-contact use: Check the product label and applicable workplace procedure before use on direct food-contact surfaces

This listing covers a bundle containing six 300-sheet light-grade refill rolls and one reusable container. It does not mean that six separate reusable containers are supplied.

Recommended Applications

Rosche Anti-Bacterial Surface Wipes Light may be used for routine cleaning of compatible hard surfaces in:

• Offices
• Reception areas
• Staff rooms
• Meeting rooms
• Training rooms
• Educational facilities
• Childcare facilities where permitted by site procedures
• Commercial kitchens
• Cafes
• Restaurants
• Hospitality venues
• Hotels and accommodation facilities
• Gyms and fitness centres
• Retail shops
• Shopping facilities
• Workshops
• Warehouses
• Manufacturing facilities
• Public amenities
• Bathrooms
• Washrooms
• Medical waiting rooms for general environmental cleaning
• Community facilities
• Vehicle interiors
• Household kitchens
• Household bathrooms
• Home offices
• Shared workspaces

Suitable surface applications may include:

• Benchtops
• Tables
• Counters
• Desks
• Door handles
• Light switches
• Telephone handsets
• Shared keyboards where equipment cleaning instructions permit
• Computer mice
• Trolley handles
• Bathroom counters
• Toilet seats
• Tap handles
• Cabinet handles
• Appliance exteriors
• Reception counters
• Shared tools with compatible finishes
• Vehicle steering wheels where material compatibility has been confirmed
• Non-porous plastic surfaces
• Sealed metal surfaces
• Sealed laminated surfaces

Before widespread use, test the wipe on a small and inconspicuous area. Surface coatings, paints, polished finishes, natural stone, unfinished timber, leather, fabric, acrylic, touchscreen coatings and sensitive electronic equipment may react differently to cleaning solutions.

Do not apply excessive liquid directly around electrical connections, charging ports, ventilation openings or control panels. Switch equipment off and follow the equipment manufacturer’s cleaning instructions.

The wipes should not be used on food, cooking ingredients, eating utensils or surfaces in direct contact with food unless the product label expressly permits the application and any required rinsing procedure is followed.

Key Features and Benefits

Six-Roll Bulk Pack

The bundle contains six refill rolls, with 300 wipes on each roll. This provides 1,800 wipes in total and reduces the need to purchase frequent small packets.

The bulk quantity is suitable for businesses and facilities that clean high-touch surfaces throughout the working day. Replacement rolls can be stored until required and loaded into the reusable container as each roll is finished.

Reusable Container Included

The included container provides a convenient way to store and dispense the wipes. It helps protect the active roll from dust and contamination while reducing unnecessary moisture loss.

The container should be kept closed whenever a wipe is not being removed. Leaving it open can cause the exposed sheets and eventually the complete roll to dry out.

When changing rolls, inspect the container and clean it in accordance with the manufacturer’s instructions. Do not place a fresh refill into a visibly dirty or contaminated container.

Convenient Pre-Moistened Format

The wipes arrive pre-moistened and ready to use. There is no need to dilute a chemical, fill a spray bottle or prepare a separate cloth for routine wiping.

This format can simplify cleaning in shared environments and reduce variation caused by workers mixing cleaning chemicals at different concentrations.

Pre-moistened wipes also provide convenient access for quick response to fingerprints, light spills and routine surface contamination.

Light-Grade Construction

The light-grade wipe is designed for economical, frequent surface cleaning. It provides a practical option where a new wipe is preferred for separate surfaces or cleaning zones.

A light-grade wipe may not be suitable for heavy scrubbing, sharp metal edges or large quantities of grease and industrial soil. Use an appropriate heavy-duty cloth or degreasing product where the contamination exceeds the intended capability of the wipe.

Compact 150 × 180 mm Sheet Size

Each wipe measures 150 mm × 180 mm. This size is convenient for handling and provides useful coverage for common high-touch surfaces.

The compact sheet size helps limit unnecessary material use during small cleaning tasks such as wiping a phone, handle, switch, tap or section of benchtop.

Larger or heavily contaminated surfaces may require more than one wipe. Do not continue spreading visible contamination after a wipe becomes dirty or dry.

Routine High-Touch Surface Cleaning

High-touch surfaces can accumulate dirt and contamination through repeated handling. Examples include door handles, reception counters, telephones, switches, shared tools and bathroom fixtures.

Keeping wipes readily available can encourage more consistent cleaning of these areas. Cleaning frequency should be based on site use, contamination risks and workplace procedures.

Single-Use Hygiene

Each wipe is intended for a single cleaning session and should be discarded after use. Using a fresh wipe for separate areas can help reduce the transfer of contamination between unrelated surfaces.

Do not return a used wipe to the container. Do not place used wipes on top of the unused roll.

When cleaning bathrooms, kitchens and general office areas, use separate wipes and follow any colour-coding or zone-separation procedures established by the workplace.

Suitable for Commercial and Household Environments

The six-roll configuration is suitable for both business and household users requiring a substantial supply of ready-to-use surface wipes.

Commercial users can position the reusable container in an accessible cleaning station. Household users can keep the container in a kitchen, bathroom, garage or laundry while storing the remaining refill rolls securely.

Supports Consistent Cleaning Procedures

Ready-to-use wipes can support a consistent cleaning routine because each sheet is supplied pre-moistened. This avoids estimating a spray quantity for every surface.

However, the surface must receive sufficient solution and remain wet for any contact time stated on the product label. A quick wipe followed by immediate drying may not achieve the intended antibacterial result.

Controlled Dispensing

The roll-and-container system allows individual wipes to be dispensed as required. Controlled dispensing helps reduce the likelihood of several wipes being removed accidentally.

If the roll does not dispense correctly, check that it has been loaded in the correct direction and that the first wipe has been fed through the dispensing opening properly.

Do not enlarge or damage the dispensing opening, as this may reduce moisture retention or cause multiple wipes to pull through together.

Understanding Antibacterial Surface Wipes

Cleaning and disinfection are related but different processes. Cleaning removes visible dirt, grease and organic material from a surface. An antibacterial product is intended to reduce bacteria when used according to its labelled directions.

Visible soil can interfere with antibacterial performance. Heavily soiled surfaces may require preliminary cleaning before applying a fresh antibacterial wipe.

The surface should be wiped thoroughly so that the required area is covered. Where a contact time is specified on the label, the surface must remain wet for that period.

Do not make assumptions about effectiveness against viruses, fungi, spores or a particular disease-causing organism unless that claim appears on the current product label or supporting technical documentation.

These wipes should not be described as hospital-grade disinfectant wipes unless Rosche provides current documentation supporting that classification for product code 8907.

Directions for Use

Open the reusable container and remove the protective packaging from one refill roll.

Place the roll into the clean container in the orientation recommended for dispensing.

Locate the first wipe from the appropriate part of the roll and feed it through the container opening.

Close the container securely before pulling the first wipe through.

Remove one wipe at a time. Tear or separate it at the perforation where applicable.

Wipe the surface thoroughly, paying attention to corners, edges and frequently touched areas.

Use enough wipes to cover the entire surface. Replace the wipe when it becomes visibly dirty, dry or overloaded with contamination.

Allow the treated surface to air dry unless the product label or surface manufacturer specifies a different procedure.

For antibacterial performance, comply with any minimum wet-contact time stated on the current product label.

Dispose of the used wipe in general waste immediately after use. Do not flush it down a toilet, sink or drain.

Close the container promptly after dispensing to help prevent the remaining wipes from drying out.

Wash hands after use, particularly before eating, drinking or handling food.

When the roll is empty, clean and dry the reusable container as directed before installing another refill.

Product Limitations

Rosche Anti-Bacterial Surface Wipes Light are intended for compatible surfaces and should not be used as:

• Baby wipes
• Facial wipes
• Hand sanitiser
• Personal cleansing wipes
• Medical treatment
• Wound-cleaning wipes
• Food wipes
• Pet-cleaning wipes
• Flushable toilet wipes
• Heavy industrial degreasing wipes
• Paint-removal wipes
• Solvent wipes
• Sterilising products
• Hospital-grade disinfectant wipes unless specifically documented

Avoid use on unfinished wood, unsealed stone, fabrics, leather, suede, damaged paint, delicate coatings or electronic screens unless compatibility has been confirmed.

Typical Product Properties

Product specifications may change as Rosche updates its range or packaging. Check the supplied carton, refill packaging and product label before use where a precise formulation, ingredient or performance claim is required.

Handling & Storage Advice

Store unopened refill rolls in their original packaging in a cool, dry and well-ventilated area.

Protect the product from direct sunlight, excessive heat, freezing conditions, ignition sources and physical damage.

Keep the reusable container securely closed between uses. This is essential for reducing evaporation and preventing the wipes from drying out.

Do not transfer the wipes into an incompatible or unlabelled container. Retain the product label and identification information.

Keep out of reach of children. The wipes are intended for surface cleaning and should not be placed in the mouth or used around the eyes.

Avoid direct contact with eyes. If contact occurs, rinse carefully with clean water. Follow the product label and seek medical advice if irritation persists.

Discontinue use if skin irritation or an allergic reaction develops. People with known sensitivity to any listed ingredient should avoid handling the product.

Do not mix the wipes or their liquid with bleach, acids, ammonia, disinfectants or other cleaning chemicals. Combining cleaning products can cause hazardous reactions or reduce performance.

Do not store unused wipes outside the container because they may dry out or become contaminated.

Keep refill packaging closed until the roll is required. Do not open all six rolls at once.

Store the carton away from food, animal feed and personal-care products.

Clean liquid released from a damaged package promptly. Wet floors can become slippery.

Used wipes must be placed in an appropriate waste bin. Do not dispose of wipes through toilets, sinks, drains or stormwater systems.

Consult the current Rosche product label and Safety Data Sheet before commercial or workplace use.

Pack Information

• Product: Rosche Anti-Bacterial Surface Wipes Light
• Product code: 8907
• Pack configuration: Six refill rolls
• Quantity per roll: 300 wipes
• Total quantity: 1,800 wipes
• Wipe size: 150 × 180 mm
• Wipe grade: Light
• Included accessory: One reusable dispensing container
• Primary use: Routine cleaning of compatible hard surfaces
• Refilling requirement: Install one roll at a time
• Storage requirement: Keep unopened rolls sealed
• Moisture protection: Keep the container closed
• Disposal requirement: Place used wipes in general waste
• Important restriction: Do not flush