PIUSI SuzzaraBlue Manual Nozzle for AdBlue® Dispensing | Stainless-Steel Spout | F14761000

Product Overview

The PIUSI SuzzaraBlue Manual Nozzle is a lightweight, manually operated dispensing nozzle designed for transferring AdBlue® Diesel Exhaust Fluid from a compatible pump, hose or gravity-fed dispensing system into the dedicated DEF tank of a vehicle or machine.

Manufactured by PIUSI, the F14761000 nozzle combines a durable technopolymer body with a stainless-steel dispensing spout. These materials are selected for compatibility with urea-based fluids and help support clean, controlled dispensing when the nozzle is correctly installed and dedicated exclusively to AdBlue®, Diesel Exhaust Fluid or AUS 32 service.

The nozzle provides a simple alternative to an automatic shut-off nozzle. Flow is started, controlled and stopped manually by the operator using the dispensing lever. Its low flow resistance allows it to handle flow rates of up to 80 litres per minute under suitable system conditions, while its ergonomic grip and low product weight make it convenient for regular workshop, fleet, agricultural and industrial use.

This model is supplied without an integrated flow meter and without an automatic shut-off mechanism. The operator must remain present throughout the entire dispensing operation and manually release the lever before the receiving tank becomes full.

AdBlue® is a registered trade mark of the Verband der Automobilindustrie e.V. (VDA).

Specifications and Product Details

• Brand: PIUSI
• Product range: SuzzaraBlue
• Manufacturer part number: F14761000
• Product type: Manual fluid dispensing nozzle
• Intended application: Dispensing AdBlue®, DEF and AUS 32
• Maximum nominal flow rate: Up to 80 litres per minute
• Maximum operating pressure: 3.4 bar
• Nozzle body: Technopolymer
• Dispensing spout: Stainless steel
• Inlet connection: 3/4-inch BSP
• Spout outside diameter: 3/4 inch
• Hose-tail fitting: Included
• Swivel connection: No
• Operating method: Manual lever
• Automatic shut-off: No
• Integrated flow meter: No
• Approximate product weight: 0.2 kg
• Approximate dimensions: 375 × 140 × 55 mm
• Pump included: No
• Delivery hose included: No
• Intended installation: Compatible AdBlue® transfer hose or dispensing system

Typical Physical Properties and Technical Specifications

Handling & Storage Advice

• Dedicate the nozzle exclusively to AdBlue®, Diesel Exhaust Fluid or AUS 32 service.
• Do not use a nozzle that has previously dispensed diesel, petrol, lubricating oil, coolant, solvents or unrelated chemicals.
• Confirm that the hose, pump, fittings and storage system are also suitable for AdBlue® before installation.
• Keep the nozzle clean and protected from dust, dirt, fuel, oil and other contaminants.
• Never place the nozzle spout directly on the ground.
• Store the nozzle in a clean, dedicated holder when it is not being used.
• Inspect the technopolymer body, stainless-steel spout, lever and inlet fitting before each use.
• Do not operate the nozzle if it is cracked, distorted, leaking or otherwise damaged.
• Confirm that the system pressure does not exceed the nozzle’s maximum operating pressure of 3.4 bar.
• Do not exceed the rated capacity of any connected hose, pump, meter, coupling or fitting.
• Attend the nozzle continuously throughout dispensing.
• This is a manual nozzle and does not stop automatically when the receiving tank becomes full.
• Release the operating lever before the fluid reaches the top of the receiving tank.
• Allow sufficient room for fluid expansion and follow the vehicle or equipment manufacturer’s filling instructions.
• Clean fresh AdBlue® deposits promptly with water before crystallisation occurs.
• Do not use fuel, hydrocarbon-based cleaners or oily cloths to clean the nozzle.
• Avoid contact between AdBlue® and copper, brass, zinc, uncoated mild steel or other unsuitable materials.
• Protect the nozzle and associated equipment from impact, vehicle traffic and prolonged environmental exposure.
• Follow the current safety data sheet for the fluid being dispensed.
• Comply with applicable workplace safety, environmental and spill-control requirements.

Key Features and Benefits

Designed for AdBlue® Dispensing

The PIUSI SuzzaraBlue Manual Nozzle is specifically designed for use in urea-solution dispensing systems. It provides a suitable delivery point for transferring AdBlue®, DEF or AUS 32 from compatible drums, IBCs and bulk storage systems into SCR-equipped vehicles and machinery.

Using equipment intended for this fluid is important because AdBlue® must remain protected from contamination during storage and transfer. General-purpose fuel or oil nozzles may contain unsuitable materials or residual hydrocarbons that could compromise the fluid.

Manual Flow Control

Flow is controlled directly by the operator through the nozzle lever. This simple operating method allows the user to regulate delivery according to the size and configuration of the receiving tank.

Because this model does not include automatic shut-off, the operator has direct responsibility for monitoring the fluid level and stopping the transfer. This makes the nozzle well suited to controlled dispensing applications where a simple, cost-effective manual arrangement is preferred.

The nozzle must never be left unattended while fluid is flowing, even if the lever’s retaining feature is engaged.

Flow Rate of Up to 80 Litres per Minute

The nozzle is designed for a nominal flow rate of up to 80 litres per minute under suitable operating conditions. Its low internal flow resistance helps it work efficiently as part of compatible powered or gravity-fed dispensing systems.

Actual flow will depend on the pump capacity, system pressure, fluid temperature, hose length, hose diameter, fittings, elevation difference and receiving tank configuration. Installing the nozzle does not increase the output of the connected pump or gravity system.

The operator should use a controlled flow rate appropriate for the receiving tank. Smaller tanks and narrow fill points may require a considerably lower delivery rate to prevent splashback or overfilling.

Maximum Operating Pressure of 3.4 Bar

The nozzle has a stated maximum operating pressure of 3.4 bar. The complete dispensing system must be configured so that pressure at the nozzle remains within this limit.

Pressure-relief arrangements, pump selection and installation design should follow the equipment manufacturer’s instructions. The nozzle must not be connected to compressed-air, pressure-washer or high-pressure pumping systems that exceed its rating.

Stainless-Steel Spout

The stainless-steel spout provides a durable and fluid-compatible delivery point for insertion into suitable DEF filler openings. Stainless steel is commonly used in AdBlue® dispensing equipment because it helps minimise adverse interaction with the urea solution.

The spout should be kept clean and must not contact dirty surfaces, diesel filler openings, lubricant containers or general workshop equipment. If contamination is suspected, stop using the nozzle until it has been inspected and cleaned in accordance with the manufacturer’s instructions.

Technopolymer Body

The nozzle body is manufactured from technopolymer material selected for compatibility with the intended application. This construction contributes to the nozzle’s low weight while providing a practical housing for regular dispensing work.

Although the material is durable, the nozzle should not be dropped, driven over, dragged by the hose or used as a lever. Impact damage may create cracks that are difficult to detect but could result in leakage during subsequent operation.

Lightweight and Ergonomic Design

At approximately 0.2 kg, the nozzle is light enough for repeated use during fleet and workshop dispensing. Its ergonomic handle provides a comfortable grip and assists operators in controlling the nozzle during filling.

The lightweight design is particularly useful where multiple vehicles or machines are filled during a shift. Correct hose support is still important, because the weight and stiffness of the connected delivery hose may affect handling.

Hose-Tail Connection

The nozzle is supplied with a hose-tail fitting for integration with a compatible dispensing hose. The connection must be secured using the correct hose size and an appropriate fluid-compatible clamp or fitting.

The manufacturer’s specifications identify a 3/4-inch BSP inlet. Confirm the hose and connection arrangement before installation rather than forcing mismatched fittings or using unapproved adaptors.

This model does not incorporate a swivel. The hose should therefore be routed carefully to minimise twisting and strain at the nozzle inlet.

Non-Metered Configuration

The F14761000 nozzle does not include a flow meter. Where the transferred quantity must be monitored, a separate compatible meter may be installed elsewhere in the dispensing system.

Any meter must be suitable for AdBlue®, correctly sized for the system’s flow range and installed according to its manufacturer’s instructions. For applications involving trade measurement or customer billing, confirm that the selected meter and installation meet applicable legal metrology requirements.

Suitable Applications

The PIUSI SuzzaraBlue Manual Nozzle can be used in appropriately configured dispensing systems serving:

• Truck and transport fleets
• Bus and coach depots
• Heavy-vehicle workshops
• Agricultural machinery facilities
• Construction equipment yards
• Mining and quarry operations
• Industrial diesel equipment
• Municipal and council fleets
• Equipment-hire businesses
• Diesel generator installations
• Logistics and distribution centres
• Mobile service vehicles
• IBC-based DEF dispensing stations
• Drum-based transfer systems
• Bulk AdBlue® storage installations

Compatible receiving equipment may include trucks, buses, tractors, harvesters, loaders, excavators, graders, cranes, diesel vans, generators and other equipment fitted with a dedicated DEF tank.

The operator must confirm the suitability of the nozzle dimensions and anticipated flow rate for the receiving tank and filler opening.

Importance of Contamination Control

AdBlue® is used by Selective Catalytic Reduction systems to support the reduction of nitrogen oxide emissions from compatible diesel engines. The fluid is stored separately from diesel fuel and is introduced into the exhaust after-treatment system through controlled dosing equipment.

Contamination by diesel, petrol, oil, grease, coolant, dirt or unsuitable metals can affect fluid quality and potentially damage sensitive SCR components. A dedicated nozzle helps reduce this risk, but only when the complete system is correctly maintained.

The nozzle, hose, pump, meter, fittings and storage container should all be reserved for AdBlue® service. An item that appears visually clean may still contain hydrocarbon residue from previous use and should not be repurposed without manufacturer approval.

Colour coding, clear labels and dedicated storage can help operators distinguish the DEF dispensing equipment from diesel and lubricant transfer equipment.

Installation Guidance

Before installation, confirm that the nozzle part number is F14761000 and that the complete dispensing system is suitable for AdBlue®.

Inspect the hose and verify its internal diameter, pressure rating and fluid compatibility. Attach the supplied hose-tail connection using an appropriate compatible clamp or fitting. Ensure the connection is secure without overtightening or damaging the nozzle inlet.

Route the hose to prevent kinks, abrasion and excessive strain. Because this model does not include an inlet swivel, additional care should be taken to prevent hose twisting during use.

Commission the nozzle at a low flow rate. Inspect the inlet, body, lever and spout for leakage before placing the system into regular service. Confirm that releasing the lever stops fluid flow completely.

If any leakage or abnormal operation is observed, stop the pump, isolate the system pressure and correct the problem before further use.

Operating Instructions

Identify the dedicated AdBlue® filler on the receiving vehicle or equipment. Never insert the nozzle into a diesel, petrol, coolant or lubricant opening.

Inspect the nozzle spout for dirt or dried deposits. Insert it securely into the DEF filler before starting the transfer pump or opening the supply valve.

Hold the nozzle firmly and operate the lever gradually. Monitor the fluid flow, receiving tank and surrounding area throughout filling. Reduce the flow rate where the filler opening is small or fluid splashback occurs.

Release the lever before the receiving tank becomes full. Shut down the connected pump or close the supply valve, then allow residual flow to stop before removing the nozzle.

Return the nozzle to its dedicated holder immediately after use. Do not leave it hanging by the hose or resting on the IBC, vehicle or workshop floor.

Maintenance and Inspection

Regularly inspect the nozzle body, operating lever, stainless-steel spout and hose connection. Look for cracking, deformation, crystallised deposits, loose fittings, corrosion or leakage.

Clean external AdBlue® residue with clean water and allow the nozzle to dry in a protected location. Do not lubricate wetted parts with conventional oils or greases unless a specific manufacturer-approved product and procedure are provided.

If the lever fails to stop the flow completely, remove the nozzle from service. Do not continue using a leaking nozzle or attempt an improvised repair.

Replacement parts and servicing should follow PIUSI instructions. Components exposed to the fluid must remain compatible with AdBlue®.

Important Product Limitations

• This is a manual nozzle.
• It does not include automatic shut-off.
• It does not include a digital or mechanical flow meter.
• It does not include a pump, delivery hose, storage container or IBC adaptor.
• It must not be left unattended during dispensing.
• It is not intended for diesel, petrol or lubricating oil.
• It must not be operated above 3.4 bar.
• Maximum flow depends on the complete dispensing system and operating conditions.
• It does not manufacture, test or certify the quality of the fluid being dispensed.

References to AdBlue® describe the nozzle’s intended fluid application and do not state that the seller or dispensing equipment is certified by the VDA.

Package Contents

• One PIUSI SuzzaraBlue manual dispensing nozzle
• One stainless-steel dispensing spout
• One hose-tail connection
• Manufacturer-supplied documentation where included with the product

Pump, hose, flow meter, automatic shut-off mechanism, storage container and AdBlue® fluid are not included.

Trademark Notice

AdBlue® is a registered trade mark of the Verband der Automobilindustrie e.V. (VDA).