Marvell 3:1 Ratio Side Mounted IBC Kit with 4m x 1/2" Dispensing Hose & Metered Gun Professional IBC Oil Dispensing Kit with Digital/Mechanical Me…
We accept
Marvell 3:1 Ratio Side Mounted IBC Kit with 4m x 1/2" Dispensing Hose and Metered Gun is a professional lubricant dispensing system designed for accurate, clean and efficient transfer of oil from 1000L IBC containers. Built for workshops, fleet depots, agricultural machinery sheds, transport service centres, mining maintenance areas and industrial lubricant stores, this kit provides a complete IBC-mounted dispensing solution for users who need better control than gravity taps, hand pumps or open pouring methods.
This kit is based on a 3:1 ratio pneumatic oil pump, making it ideal for dispensing light to medium viscosity lubricants such as engine oils, hydraulic oils, transmission oils, compressor oils and general workshop lubricants. The 3:1 ratio provides a practical balance between delivery pressure, air efficiency and controlled flow. It is especially suitable for sites where oil is dispensed frequently but where a higher pressure 5:1 pump may not be necessary.
The key advantage of this version is the inclusion of a metered dispensing gun. A metered gun allows operators to measure the amount of oil being dispensed, improving fill accuracy, reducing overfilling, lowering product waste and supporting better inventory control. This is particularly useful for workshops charging oil by litre, fleet depots tracking lubricant usage, and maintenance teams servicing multiple machines from bulk IBC storage.
The kit includes a 3:1 ratio pump, side or front mount bracket, IBC suction kit with adapter, 4m x 1/2" dispensing hose and metered oil control gun. The 4m hose provides practical working reach around the IBC and service area, while the side-mounted configuration keeps the system organised, compact and suitable for busy workspaces.
| Specification | Details |
|---|---|
| Product Type | Side mounted IBC oil dispensing kit |
| Pump Ratio | 3:1 |
| Hose Length | 4m |
| Hose Size | 1/2" |
| Dispensing Gun Type | Metered oil control gun |
| Suction System | IBC suction kit with adapter |
| Mounting Type | Side / front mounted bracket system |
| Suitable Container | 1000L IBC pod |
| Operating Type | Pneumatic pump with metered dispensing control |
| Suitable Fluids | Compatible lubricating oils and non-corrosive oil products |
| Typical Use | Oil dispensing from IBC storage |
| IBC Included | No |
This kit should not be used for fuels, solvents, AdBlue, water-based products, corrosive chemicals or flammable liquids unless all components are specifically rated for that fluid type.
The 3:1 pneumatic pump is designed for reliable oil dispensing from bulk IBC containers. It provides stronger delivery than simple gravity systems while maintaining good control for everyday lubricant transfer. This ratio is suitable for many workshop oils and is especially practical for engine oil, hydraulic oil and transmission oil dispensing.
The metered dispensing gun is the key feature of this model. It allows the operator to monitor and control the quantity of lubricant dispensed, helping prevent overfilling and reducing oil waste. Accurate dispensing is especially valuable in mechanical workshops, fleet service centres and industrial maintenance operations where oil usage needs to be recorded or billed.
Using a proper IBC dispensing kit reduces spills, leaks and uncontrolled pouring. This helps keep workshop floors cleaner, lowers slip hazards and improves housekeeping. Cleaner oil transfer also improves professional presentation in customer-facing workshops and dealership service bays.
Lubricant contamination can damage engines, transmissions and hydraulic systems. The enclosed suction and hose delivery system helps reduce exposure to dust, moisture and dirt during transfer. This is especially important for hydraulic fluids, where contamination can lead to pump wear, valve sticking and premature component failure.
The included 4m hose gives operators good working reach around the IBC and nearby service area. The 1/2" hose size supports practical oil flow while remaining manageable for workshop users.
The side-mounted configuration keeps the pump and hose organised close to the IBC, reducing clutter and making the dispensing station easier to use. This is useful in workshops, farms and industrial stores where space is limited.
Bulk oil stored in IBCs can be difficult to dispense safely without a pump. This kit reduces the need to lift or tip containers, improving operator safety and reducing strain injuries.
The metered gun supports more accurate lubricant tracking. This helps businesses monitor oil consumption, identify unusual usage, improve cost control and reduce losses from uncontrolled dispensing.
Marvell 3:1 Ratio Side Mounted IBC Kit with Metered Gun is ideal for:
It is suitable for businesses that purchase lubricants in 1000L IBC containers and need controlled dispensing into engines, gearboxes, hydraulic reservoirs, service jugs, drums, workshop carts or machinery fill points.
| Property | Typical Value |
|---|---|
| Product Type | IBC oil dispensing kit |
| Pump Ratio | 3:1 |
| Hose Length | 4m |
| Hose Diameter | 1/2" |
| Gun Type | Metered oil control gun |
| Mounting Type | Side / front IBC mounted |
| Suction Type | IBC suction kit with adapter |
| Suitable Container | 1000L IBC pod |
| Operation | Pneumatic |
| Compatible Fluids | Lubricating oils and compatible non-corrosive oils |
| IBC Included | No |
| Recommended Use | Workshop, fleet, farm and industrial oil dispensing |
The Marvell 3:1 Ratio Side Mounted IBC Kit with Metered Gun is designed for users who need cleaner, more accurate and more efficient oil dispensing from bulk lubricant storage. For workshops, it helps improve job costing by allowing oil usage to be measured more accurately. For farms, it makes servicing tractors, harvesters and loaders easier and cleaner. For fleet depots, it supports consistent oil dispensing across multiple vehicles and machines.
Compared with a manual gun version, the metered gun provides better control over the quantity dispensed. This is ideal where oil is charged to a customer, allocated to a fleet asset, or recorded against maintenance jobs. It helps reduce waste, prevents accidental overfilling and makes lubricant stock control more reliable.
The 3:1 pump is suitable for many common workshop lubricants, making this kit a practical choice for daily servicing environments. It offers a professional upgrade from gravity feed taps and helps businesses gain better value from bulk IBC lubricant purchasing.
This product hasn't received any reviews yet. Be the first to review this product!
Marvell
Marvell
Marvell
TECALEMIT
