null

Marvell Compressor Oil 68 (20L)

Marvell

No reviews yet Write a Review
SKU:
HI6-2763-0020
215.38A$ inc GST
Width:
30.00 (cm)
Height:
30.00 (cm)
Depth:
40.00 (cm)
215.38A$ inc GST

Description

Marvell Compressor Oil 68 Mineral Air Compressor Oil 20L

Product Description

Marvell Compressor Oil 68 is a premium mineral-based, zinc-free industrial lubricant developed for compatible rotary vane, rotary screw and reciprocating air compressors requiring an ISO VG 68 compressor oil. Supplied in a practical 20-litre container, it provides dependable lubrication, wear protection, oxidation resistance, corrosion control and water separation across a broad range of industrial, commercial and workshop compressor applications.

Air-compressor lubricants operate in demanding conditions. The oil may be exposed to compressed-air heat, elevated discharge temperatures, moisture, continuous mechanical circulation and contact with bearings, gears, cylinders, rotors and sealing surfaces. An unsuitable lubricant can oxidise rapidly, form deposits, generate excessive foam or fail to separate condensed water effectively.

Marvell Compressor Oil 68 is manufactured from high-quality paraffinic mineral base oils combined with a carefully balanced additive system. The formulation includes anti-wear and anti-scuffing protection together with inhibitors that help control oxidation, rust, corrosion and unwanted foam formation.

The ISO VG 68 viscosity grade provides a nominal kinematic viscosity of 68 mm²/s at 40°C. It is commonly selected for compatible reciprocating compressor crankcases and cylinders, rotary vane compressors and certain rotary screw compressors where the original equipment manufacturer specifies a mineral ISO VG 68 lubricant.

The product’s anti-scuffing characteristics help protect components exposed to high speed, pressure and temperature. This protection is particularly important around bearings, gears, sliding surfaces, cylinders and other components where the normal lubricant film may become thin under load.

Effective demulsibility allows condensed water to separate from the oil rather than forming a persistent emulsion. Water separation supports efficient lubrication and allows accumulated water to be drained from the compressor system in accordance with the equipment manufacturer’s maintenance procedure.

Marvell Compressor Oil 68 is zinc-free. This helps minimise metallic additive residue and supports cleaner compressor operation where an ashless or zinc-free mineral lubricant is required.

The formulation is also published as satisfying several industrial hydraulic-oil performance levels. However, it should only be used in a hydraulic system after confirming that ISO VG 68 and the applicable performance category are specified by the equipment manufacturer.

This product is not a synthetic compressor lubricant. Equipment requiring a polyalphaolefin, polyalkylene glycol, polyol ester, diester, silicone or other specialised synthetic fluid must not be filled with Marvell Compressor Oil 68 unless the manufacturer specifically authorises the substitution.

Specifications and Performance Levels

  • Brand: Marvell

  • Product name: Marvell Compressor Oil 68

  • Product type: Industrial air-compressor lubricant

  • Base-oil type: Highly refined paraffinic mineral oil

  • Additive technology: Zinc-free anti-wear formulation

  • ISO viscosity grade: ISO VG 68

  • Appearance: Amber liquid

  • Primary application: Compatible industrial air compressors

  • Rotary compressor suitability: Selected rotary vane and rotary screw compressors

  • Reciprocating compressor suitability: Crankcases and cylinders requiring ISO VG 68 mineral oil

  • Published compressor performance: DIN 51506 VBL, VCL and VDL

  • Published compressor classifications: ISO/DP 6521 DAA, DAB, DAH and DAG

  • Published hydraulic performance: DIN 51524 Parts 1 and 2, HL and HLP

  • ISO hydraulic classification: ISO 6743-4 HM

  • ISO hydraulic performance: ISO 11158 HM

  • Cincinnati Machine performance: P-69 for ISO VG 68

  • Other published industrial performance levels: SEB 181 222 and VDMA 24318

  • Published pump-performance references: Denison HF-0, HF-1 and HF-2

  • Published Parker Hannifin performance: HF-0

  • Published AFNOR performance: NF E 48-603 HM

  • Published US Steel performance: US Steel 126, 127 and 136

  • Published Vickers performance: I-286-S and M-2950-S

  • Pack size: 20 litres

  • Product code: HI6-2763-0020

  • Base manufacturer product code: HI6-2763

  • Barcode or GTIN: Not published; confirm against supplied packaging

  • Formal OEM approvals: No universal compressor-manufacturer approval should be assumed

The specifications above represent published performance claims rather than formal approval for every compressor, hydraulic pump or equipment model associated with those standards.

References to compressor manufacturers or industrial standards do not mean the product is approved for every machine produced under those brands. Always check the compressor manual, lubrication plate or service documentation before use.

ISO VG 68 defines the lubricant’s viscosity range at 40°C. It does not by itself confirm compatibility with the compressor design, seal materials, additive requirements, discharge temperature or prescribed service interval.

Recommended Applications

Marvell Compressor Oil 68 may be considered for compatible applications including:

  • Reciprocating air-compressor crankcases

  • Reciprocating compressor cylinders

  • Single-stage reciprocating compressors

  • Multi-stage reciprocating compressors

  • Rotary vane air compressors requiring ISO VG 68 oil

  • Oil-lubricated rotary screw compressors where mineral ISO VG 68 oil is specified

  • Stationary workshop compressors

  • Manufacturing-plant compressed-air systems

  • Engineering workshops

  • Automotive service workshops

  • Fleet-maintenance facilities

  • Agricultural workshops

  • Farm air compressors

  • Construction-equipment workshops

  • Quarry and mining maintenance facilities

  • Compressor systems operating in humid environments

  • Compressor systems exposed to normal condensate formation

  • Compressor systems incorporating compatible gears and bearings

  • General industrial machinery requiring a suitable zinc-free ISO VG 68 oil

  • Selected circulating-oil systems

  • Selected hydraulic systems requiring ISO VG 68 HM or HLP-type oil

  • Compatible machine-tool hydraulic systems

  • Industrial pumps requiring an applicable ISO VG 68 mineral lubricant

The compressor manufacturer’s recommendation takes priority over general application guidance. Confirm the required viscosity, lubricant chemistry, compressor-oil classification, operating temperature and oil-change interval before filling.

Marvell Compressor Oil 68 is not intended for oil-free compressors. Oil-free compressors may still contain lubricated gearcases or bearings, but only the fluid specifically prescribed for those compartments should be used.

It must not be used as a refrigeration-compressor oil unless the refrigeration-equipment manufacturer specifically approves this product. Refrigeration compressors frequently require specialised mineral, alkylbenzene, polyol ester, polyalkylene glycol or other refrigerant-compatible lubricants.

It should not be used in compressors supplying breathing air or medical air unless the complete compressor system and lubricant have been expressly approved for that purpose.

Do not use it in oxygen compressors or systems handling oxygen-rich gases. Hydrocarbon lubricants can present a severe fire or explosion hazard when exposed to concentrated oxygen.

Suitability for compressors handling natural gas, process gas, carbon dioxide, ammonia, hydrogen or other gases must be confirmed by the compressor manufacturer and process-system engineer.

Key Features and Benefits

ISO VG 68 Viscosity

Marvell Compressor Oil 68 provides the operating viscosity required by compressors specifying an ISO VG 68 lubricant. The viscosity supports an effective lubricating film across bearings, gears, cylinders and sliding components under appropriate operating conditions.

Using an oil that is too light may reduce film strength and increase wear or leakage. Oil that is too heavy may increase drag, restrict circulation, raise operating temperature and interfere with cold starting. The compressor manufacturer’s specified viscosity must therefore be followed.

Zinc-Free Mineral Formulation

The oil is produced from highly refined paraffinic mineral base oils and a zinc-free additive system. Zinc-free technology helps provide wear protection without relying on conventional zinc-containing anti-wear additives.

A zinc-free formulation can also help minimise metallic ash and deposit formation in compressor systems where this lubricant type is recommended.

The term zinc-free does not mean the product is additive-free. It contains a balanced combination of oxidation inhibitors, rust and corrosion inhibitors, anti-wear agents, anti-scuffing additives, demulsifiers and foam-control components.

Oxidation and Thermal Stability

Compressed-air systems can expose lubricant to elevated temperatures and a continuous supply of oxygen. These conditions can accelerate oxidation and cause the lubricant to thicken or form acidic degradation products, sludge, varnish and carbonaceous deposits.

Marvell Compressor Oil 68 is formulated to resist oxidation during normal service. Oxidation control helps maintain viscosity, preserve oil circulation and reduce deposit formation around valves, separators, discharge passages and other compressor components.

Oil life depends on compressor design, discharge temperature, duty cycle, ventilation, ambient conditions, contamination and maintenance. Published oxidation performance must not be interpreted as a guaranteed service interval.

Wear and Scuffing Protection

The anti-wear and anti-scuffing additive system helps protect components exposed to sliding contact, concentrated loads and high operating speeds.

Protected components may include:

  • Bearings

  • Gear teeth

  • Shafts

  • Vanes

  • Rotors

  • Cylinder walls

  • Piston rings

  • Crankshaft components

  • Connecting-rod bearings

  • Other lubricated compressor surfaces

Correct oil supports component life but cannot compensate for inadequate lubricant quantity, blocked passages, failed cooling, excessive discharge temperature, mechanical misalignment or damaged components.

Quick Water Separation

Moisture is a normal concern in compressed-air systems. Water can enter the lubricant through atmospheric humidity, condensation and changing equipment temperatures.

Marvell Compressor Oil 68 has demulsibility characteristics that promote separation of water from oil. Separated water can then be removed from appropriate drain points rather than remaining as a stable oil-and-water emulsion.

Good water separation helps preserve lubricant performance and reduces the risk of rust, sludge formation and blocked separator elements. It does not eliminate the need to drain receiver tanks, separators, filters and compressor sumps at the required intervals.

Rust and Corrosion Protection

The additive system helps protect ferrous and compatible non-ferrous metals against rust and corrosion, including in systems where fresh-water or salt-water contamination may occasionally occur.

Corrosion protection is particularly valuable in equipment subjected to humid operation, intermittent use, temperature cycling or extended shutdown periods.

Heavy water contamination must still be investigated and corrected. Lubricant additives cannot provide unlimited protection against continuous water entry.

Foam Control and Air Release

Excessive foam can interfere with lubrication, accelerate oxidation and contribute to unstable oil levels or lubricant carryover.

Marvell Compressor Oil 68 contains foam-control additives that help prevent persistent foam under normal operating conditions. Published test data records nil foam after settling across the applicable test sequences.

Visible or continuing foam can indicate contamination, overfilling, an incorrect lubricant, air leakage or a mechanical problem and should be investigated.

Deposit Control

Low deposit-forming characteristics help keep internal compressor surfaces, valves, oil passages and separators cleaner during the appropriate service interval.

Deposit control supports efficient operation, but no lubricant can prevent deposits when the compressor is operated at excessive temperatures or when oil changes and maintenance are neglected.

Compatibility with Selected Hydraulic Applications

The product carries published performance claims for several mineral hydraulic-oil classifications, including DIN 51524 HL and HLP and ISO 11158 HM.

This versatility may help industrial sites consolidate lubricant inventory where both the compressor and hydraulic equipment explicitly accept the same ISO VG 68 mineral-oil specification.

The product should not be substituted for fire-resistant, biodegradable, food-grade, low-toxicity or specialised synthetic hydraulic fluids.

Directions for Use

Before filling, consult the compressor manual and confirm that an ISO VG 68 mineral, zinc-free compressor lubricant satisfying the relevant published performance level is required.

Identify every lubrication compartment. Some compressors use different lubricants in the compressor element, gearbox, bearings and motor, and these fluids must not be assumed to be interchangeable.

Where changing from another lubricant, determine whether the existing and replacement oils are compatible. Mixing mineral and synthetic compressor oils can produce deposits, seal problems, excessive foam or reduced performance.

If compatibility is uncertain, drain the existing oil fully and flush the system using the procedure approved by the compressor manufacturer.

Shut down the compressor, isolate all energy sources, release stored pressure and apply the workplace lockout procedure before servicing. Compressor oil and internal components may be extremely hot.

Drain the used lubricant into a suitable container. Replace oil filters, air-oil separator elements and other service components at the specified interval.

Fill gradually to the level indicated by the sight glass, dipstick or manufacturer’s procedure. Do not overfill. Excess lubricant can increase carryover, foaming, system temperature and separator loading.

Restart the compressor according to the manufacturer’s procedure. Check oil pressure, temperature, operating sound, leakage and lubricant level.

Recheck the oil level after circulation and once the compressor has been stopped and allowed to settle for the specified period.

Drain accumulated condensate at the required intervals. Investigate abnormal oil darkening, burnt odour, rapid viscosity change, excessive consumption, foaming or repeated water contamination.

Do not extend the oil-change interval solely because the oil appears visually clean. Follow the compressor manufacturer’s interval or use an appropriate oil-analysis program.

Typical Physical Properties

Property Typical Value
ISO viscosity grade ISO VG 68
Base-oil type Paraffinic mineral oil
Additive type Zinc-free anti-wear system
Appearance Amber liquid
Density at 15°C 0.887 kg/L
Kinematic viscosity at 40°C 68.0 mm²/s
Kinematic viscosity at 100°C 8.8 mm²/s
Viscosity index 104
Flash point, Cleveland Open Cup 243°C
Pour point −6°C
Aniline point 103°C
Oxidation stability, time to TAN 1.5 Greater than 1,500 hours
Rust prevention, salt water at 48 hours Pass
Foam characteristics after settling Nil
Nominal oil mass in 20L pack Approximately 17.7 kg
Pack size 20 litres

Typical physical properties represent normal production data and should not be interpreted as guaranteed manufacturing limits. Minor variation may occur between production batches. Refer to the current product data sheet, Safety Data Sheet and supplied container where a precise or contractually controlled value is required.

Handling & Storage Advice

Store Marvell Compressor Oil 68 in its original, correctly labelled 20-litre container. Keep the cap securely closed and store the container upright in a cool, dry, covered and well-ventilated location.

Protect the product from rain, direct sunlight, excessive heat, sparks, flames and physical damage. Although the product has a high flash point, it is a combustible liquid and can burn when sufficiently heated.

Do not allow water, dust, metal particles, cleaning chemicals, fuel, coolant, solvent or used oil to enter the container. Even small amounts of contamination can reduce compressor reliability.

Use clean, dedicated pumps, funnels and transfer containers. Equipment previously used with another lubricant should be cleaned and confirmed compatible before use.

The oil content alone weighs approximately 17.7 kg. The complete package will be heavier and may be awkward to lift or pour. Assess the load before handling and use a trolley, lifting aid, drum cradle or two-person lift where required by the workplace risk assessment.

Do not attempt to pour from the full container if the weight cannot be controlled safely. A clean dispensing pump or tap can reduce lifting and minimise spills.

Avoid prolonged or repeated contact with new or used oil. Wear oil-resistant gloves, suitable protective clothing and eye protection where splashing is possible.

Wash exposed skin thoroughly with soap and water. Do not use petrol, solvents or abrasive workshop cleaners on the skin.

High-pressure fluid injection through the skin is a medical emergency. Even a small puncture may cause severe internal injury. Seek urgent medical attention following any suspected injection injury.

Clean spills promptly because oil creates a serious slip hazard. Contain the spill with suitable absorbent material and prevent it from entering drains, soil, stormwater systems or waterways.

Used compressor oil may contain harmful contaminants accumulated during service. Collect it in an appropriate labelled container and send it to an authorised oil recycler or waste contractor.

Do not cut, drill, weld, grind or apply heat to the empty container. Residual oil or vapour may remain after draining. Consult the current Safety Data Sheet before workplace use.

Pack Information

  • Product: Marvell Compressor Oil 68

  • Selling unit: One 20-litre container

  • Nominal volume: 20 litres

  • Product code: HI6-2763-0020

  • Base product code: HI6-2763

  • Barcode or GTIN: Confirm against supplied container

  • Container type: Portable industrial lubricant package

  • Approximate oil mass: 17.7 kg

  • Primary application: Industrial air compressors

  • Lubricant type: Zinc-free mineral compressor oil

  • ISO viscosity grade: ISO VG 68

  • Dispensing recommendation: Clean dedicated pump, tap or funnel

  • Manual-handling recommendation: Use assisted handling where required

  • Storage requirement: Upright, sealed, covered and protected from contamination

  • Disposal requirement: Send used oil to an authorised recycler or waste contractor

Extra Information

Brand:
Marvell
Width:
30.00 (cm)
Height:
30.00 (cm)
Depth:
40.00 (cm)