Description
Castrol GTX Diesel 15W-40 is a part-synthetic engine oil designed to help protect diesel engines against soot, harmful deposits, oil thickening and wear. It is suitable for specified automotive diesel engines, including turbocharged and intercooled engines. The Australian-market product is also listed for certain petrol, LPG and CNG vehicles where the manufacturer specifies the relevant oil requirements.
Features and Benefits
-
Engine cleanliness: Helps reduce the build-up of harmful deposits and sludge.
-
Wear protection: Helps protect engine components against wear.
-
Viscosity control: Helps resist oil thickening and thermal breakdown.
-
Performance maintenance: Helps maintain oil circulation and engine performance.
-
Turbocharged engine suitability: Suitable for specified turbocharged and intercooled engines.
-
Reduced oil consumption: Formulated to help minimise oil consumption.
Applications
-
Automotive diesel engines requiring SAE 15W-40.
-
Turbocharged and intercooled diesel engines where the specified performance requirements are met.
-
Selected passenger vehicles and light commercial vehicles.
-
Certain petrol, LPG and CNG engines where the vehicle manufacturer recommends the applicable specifications.
Important: The Australian product information states that this oil is not recommended for vehicles fitted with diesel particulate filters (DPFs). Always check the vehicle manufacturer's requirements before use.
Specifications and Performance Claims
According to Castrol Australia's product catalogue, the product is listed against the following specifications:
-
ACEA A3/B4
-
API SP
These are performance specifications, not individual vehicle-manufacturer approvals. The product is not intended as a substitute for heavy-duty diesel oils requiring newer commercial diesel specifications unless explicitly confirmed by the manufacturer.
Typical Physical Characteristics
|
Property |
Typical value |
Test method |
|---|---|---|
|
SAE viscosity grade |
15W-40 |
SAE J300 |
|
Kinematic viscosity at 40°C |
117 mm²/s |
ASTM D445 |
|
Kinematic viscosity at 100°C |
15.7 mm²/s |
ASTM D445 |
|
Viscosity index |
142 |
ASTM D2270 |
|
Density at 15°C |
0.872 g/mL |
— |
|
Pour point |
−39°C |
ASTM D97 |
|
Flash point (PMCC) |
202°C |
ASTM D93 |
|
CCS viscosity at −20°C |
5,874 mPa·s |
ASTM D5293 |
|
Sulphated ash |
1.1% by mass |
— |
Source: Australian lubricant supplier's published technical data, dated 23 November 2023. These are typical values, not guaranteed product specifications; confirm against the latest manufacturer-issued TDS before publication.
Storage and Handling
-
Store in sealed, original containers in a dry, covered area.
-
Avoid contamination by water, dust and other lubricants.
-
Protect containers from excessive heat and direct sunlight.
-
Follow the product Safety Data Sheet (SDS) for handling, spill response and disposal.
Health and Safety
Use appropriate protective equipment when handling the product. Avoid prolonged or repeated skin contact and clean spills promptly. Consult the current Castrol SDS for detailed hazard classification, first aid and disposal instructions.
Product Category
-
Category: Automotive engine oil
-
Viscosity grade: SAE 15W-40
-
Oil type: Part-synthetic
-
Primary application: Specified automotive diesel engines
-
Secondary applications: Compatible petrol, LPG and CNG engines where the required specifications are met