Description
astrol AIRCOL SR 46 is a premium synthetic compressor lubricant based on polyalphaolefin (PAO) base fluids and designed for oil-flooded rotary screw compressors operating under demanding conditions.
Its formulation provides excellent thermal and oxidation stability, anti-wear performance and low deposit-forming tendency. These properties help extend lubricant service life, maintain compressor cleanliness and reduce maintenance requirements.
AIRCOL SR 46 is suitable for stationary and portable oil-flooded rotary screw compressor systems, including applications operating under severe conditions and elevated air discharge temperatures.
Key Features and Benefits
-
Synthetic PAO base oil: Provides excellent thermal stability compared with conventional mineral oil-based lubricants.
-
Extended oil service life: Can support oil drain intervals of up to 8,000 hours under suitable operating conditions.
-
Low deposit formation: Helps keep compressor components, filters and separators cleaner.
-
Excellent oxidation stability: Helps resist lubricant degradation during prolonged operation at elevated temperatures.
-
Anti-wear performance: Helps protect compressor components and extend equipment life.
-
Water separation: Helps condensation separate from the oil, reducing the risk of emulsion formation.
-
Corrosion protection: Provides protection against rust under the specified test conditions.
-
Seal compatibility: Compatible with nitrile, silicone, polyurethane and fluoropolymer seals commonly used in compressors.
-
Changeover flexibility: Its PAO-based formulation is compatible with mineral-oil-based lubricants, subject to proper system assessment and changeover procedures.
Applications
Castrol AIRCOL SR 46 is designed for:
-
Oil-flooded rotary screw air compressors.
-
Single-stage and two-stage rotary screw compressors.
-
Stationary and portable compressor equipment.
-
Compressor systems operating in severe environments and demanding service conditions.
-
Applications requiring ISO VG 46 synthetic compressor oil.
-
Compressor installations requiring long lubricant service intervals, subject to the equipment manufacturer's recommendations.
The product is also suitable for compressor operating conditions defined by ISO 6743-3, including applications with air discharge temperatures up to 100°C and more demanding conditions above 100°C.
Important: AIRCOL SR 46 must not be used in compressors producing breathable air.
Classifications and Performance
Classifications
-
DIN 51506 — VDL
-
ISO 6743-3 — DAG, DAH and DAJ for rotary air compressors
Equipment manufacturer requirements
-
Meets the requirements for Atlas Copco's 8,000-hour oil drain interval.
-
Meets Kaeser requirements, as stated in the Castrol technical data sheet.
These classifications and requirements should not be interpreted as universal approval for every compressor model. Always check the equipment manufacturer's current lubricant recommendations.
Typical Physical and Chemical Properties
| Property | Typical value | Test method |
|---|---|---|
| ISO viscosity grade | 46 | ISO viscosity classification |
| Density at 15°C | 0.84 g/ml | ISO 12185 / ASTM D4052 |
| Kinematic viscosity at 40°C | 46 mm²/s | ISO 3104 / ASTM D445 |
| Kinematic viscosity at 100°C | 7.8 mm²/s | ISO 3104 / ASTM D445 |
| Viscosity index | 137 | ISO 2909 / ASTM D2270 |
| Foam, Sequence I | 10/0 ml/ml | ISO 6247 / ASTM D892 |
| Pour point | -54°C | ISO 3016 / ASTM D97 |
| Flash point, Cleveland open cup | 264°C | ISO 2592 / ASTM D92 |
| Rust test, 24 hours in synthetic seawater | Pass | ISO 7210 / ASTM D665B |
| RPVOT | 3,000 minutes | ASTM D2272 |
| FZG fail stage (A/8.3/90) | 9 | ISO 14635-1 / DIN 51354 |
The values above are typical characteristics, not guaranteed product specifications. Normal manufacturing tolerances apply.
Compatibility and Changeover
AIRCOL SR is compatible with mineral-oil-based lubricants and the following commonly used compressor seal materials:
-
Nitrile rubber (NBR)
-
Silicone
-
Polyurethane
-
Fluoropolymer
It is not compatible with SBR (styrene-butadiene rubber) or EPDM (ethylene propylene diene monomer) seals, according to Castrol's technical data sheet.
Before changing from another compressor lubricant, check the compressor manufacturer's instructions, seal materials, residual oil compatibility and the required flushing procedure.
Technical Documents
Technical Data Sheet (TDS/PDS):
https://msdspds.castrol.com/bpglis/FusionPDS.nsf/Files/160F2413B71662CD80258C9F0051A686/%24File/wepp-dhc6cp.pdf
Australian Safety Data Sheet (SDS):
https://msdspds.castrol.com/ussds/amersdsf.nsf/0/017F7980CB57B82480258D420057EB8F/%24file/3234043.pdf