Marvell Wax Base Log End Sealer Shield Clear (20L)

Premium Protection for Timber End Grain – Clear, Durable, Wax-Based Formula

Product Overview

Marvell Wax Base Log End Sealer Shield Clear (20L) is a professional-grade, wax-based end grain sealer specifically developed to protect freshly cut timber logs from moisture loss, end cracking, and excessive checking. The clear formula ensures minimal visual interference with the wood’s natural aesthetics, making it a preferred choice across sawmills, timber yards, and forestry operations throughout Australia. It’s designed to penetrate deeply into the timber pores, forming a long-lasting flexible barrier that reduces drying rates at the log ends—where wood is most vulnerable to moisture loss.

This high-performance 20-litre solution delivers industrial strength for large-scale timber operations, yet is safe and easy enough for individual use. Whether you're sealing hardwood, softwood, freshly felled logs, green timber, or exposed beams, Marvell’s clear log end sealer ensures protection without the artificial look of coloured coatings.

Key Features & Benefits

✔️ Superior Moisture Retention

By forming an impermeable barrier on the exposed log ends, this wax-based formula dramatically slows down the rate of moisture evaporation. This reduces the likelihood of end splitting and warping during the drying process, preserving timber integrity.

✔️ Crystal-Clear Finish

Unlike pigmented sealers, this product leaves behind a clean, transparent coating that doesn’t interfere with natural timber grain or species-specific colouring. Ideal for high-grade lumber where visual aesthetics are important.

✔️ Strong, Flexible Coating

Once dried, the coating remains flexible—expanding and contracting with the wood during moisture fluctuations—preventing flaking or peeling under harsh conditions.

✔️ Excellent Adhesion

The wax formulation adheres extremely well to green, wet, or freshly cut wood. It does not run off, drip, or bead during application. One coat is typically sufficient for most species and log diameters.

✔️ UV Resistant

Formulated to resist degradation from UV rays, it ensures reliable outdoor performance even in harsh sun-exposed environments.

✔️ Non-Toxic and Environmentally Considerate

The product is safe for use in outdoor environments and does not contain heavy solvents or petroleum distillates that can leach into the soil or damage vegetation.

✔️ Easy to Apply

Can be brushed, rolled, or sprayed onto timber ends. Its smooth consistency allows for quick coverage, reducing downtime in processing yards or mills.

✔️ Cost Effective & High Coverage

One 20-litre pail can seal approximately 4 to 6 cubic metres of log ends, depending on wood species, surface porosity, and application thickness.

Common Applications

• Timber Sawmills & Processing Plants: Essential for all cut logs before kiln-drying or storage to minimise wastage from splitting.

• Forestry Operations: Protects felled trees in bushland or stockpiles during harvest season.

• Furniture & Joinery Workshops: Prevents end checking on premium hardwood sections destined for architectural or furniture use.

• Decking & Landscaping Suppliers: Shields timber posts, sleepers, and planks during storage and transportation.

• Woodturners & Craft Timber Yards: Preserves highly figured or exotic timbers like burl, blackwood, or redgum from cracking during seasoning.

• Pallet & Crate Manufacturers: Helps in drying uniformity for industrial wood packaging components.

• Construction Sites: Used on exposed end beams, trusses, and timber joists awaiting installation.

Performance Highlights

Compatibility

This clear wax-based formula is designed to be compatible with a wide range of Australian native and imported timbers, including but not limited to:

• Radiata Pine

• Blackbutt

• Jarrah

• Spotted Gum

• Victorian Ash

• Red Ironbark

• Cypress

• Eucalypt species

• Merbau

• Teak

Application Guidelines

1. Surface Preparation: Ensure log ends are clean, free of dust, loose bark, or standing water. Apply shortly after cutting to maximise moisture retention.

2. Mixing: Stir thoroughly before use. Do not dilute.

3. Application Methods: Use a brush, roller, or sprayer. Ensure complete and even coverage across the end grain surface.

4. Drying Conditions: Avoid applying during rain or below 5°C. Drying time may vary with humidity and temperature.

5. Recoating: One coat is typically sufficient. A second coat may be applied for extremely porous or large-diameter logs after the first coat has dried.

Handling & Storage Advice

• Storage Conditions: Store in a cool, dry place away from direct sunlight and frost. Do not expose to temperatures above 40°C or below 0°C.

• Shelf Life: 12 months from the date of manufacture if kept sealed in original container.

• Disposal: Dispose of empty containers and waste product in accordance with local environmental regulations.

• Clean Up: Use warm soapy water to clean tools and brushes immediately after use.

• Precautions: Avoid contact with eyes and prolonged skin contact. Use in a well-ventilated area.

Typical Physical Properties