Below are the available bulk discount rates for each individual item when you purchase a certain amount
Free delivery in metropolitan areas of Melbourne, Sydney, Brisbane and Adelaide Marvell Hydraulic Oil ISO 32 (VG 32) – Premium Anti-Wear Hydraul…
We accept
Free delivery in metropolitan areas of Melbourne, Sydney, Brisbane and Adelaide
Marvell Hydraulic Oil ISO 32 is a high-quality anti-wear hydraulic fluid engineered to meet the demanding needs of light to medium-duty hydraulic systems. With a viscosity grade of VG 32, this oil is specifically designed to deliver excellent lubrication, wear protection, and thermal stability in a wide range of equipment—especially where precision, efficiency, and clean operation are crucial.
Formulated with premium base oils and an advanced zinc-based additive system, Marvell ISO 32 hydraulic oil offers extended equipment life, corrosion protection, and excellent water separation properties. It is the preferred choice for hydraulic systems operating under moderate pressures and lower ambient or working temperatures, where a thinner oil is essential for efficient system response.
VG 32 Viscosity for Optimal System Response
The ISO VG 32 viscosity rating provides fast fluid flow in hydraulic circuits, making it ideal for equipment requiring quick actuation, fine movement control, or operating in colder conditions. It ensures smooth operation without excessive resistance or drag.
Zinc-Based Anti-Wear Additive Package
Contains ZDDP (zinc dialkyl dithiophosphate) technology for enhanced protection of pumps, control valves, and hydraulic pistons. Reduces wear on moving metal surfaces, prolonging component life and lowering maintenance costs.
High Oxidation Stability
Resists oil breakdown and sludge formation even under continuous operation, ensuring extended drain intervals and system cleanliness.
Rust and Corrosion Protection
Defends steel, aluminium, brass, and other metals commonly found in hydraulic systems from rust and corrosion due to moisture exposure.
Excellent Demulsibility
Rapid separation of water from oil ensures the system operates effectively, even in high humidity environments or where condensation is common. Protects internal parts from rust and lubricant failure.
Low Foaming Tendency
Special foam inhibitors minimize air entrainment, providing smooth operation, consistent pressure transfer, and protection against cavitation damage in high-speed pumps.
Extended Equipment Life
Keeps valves, seals, hoses, and pumps in top condition by reducing wear, heat, and sludge. Ideal for continuous-use environments with tight tolerances.
Marvell Hydraulic Oil ISO 32 is recommended for a wide variety of mobile and stationary hydraulic applications that require an anti-wear fluid of ISO VG 32 viscosity, including:
CNC and industrial manufacturing machinery
Injection moulding systems
Hydraulic presses and shearing machines
Forklifts, scissor lifts, and warehouse handling equipment
Light construction equipment such as mini excavators and compactors
Agricultural implements and sprayers with onboard hydraulic systems
Timber processing and sawmill equipment
Small hydraulic power packs
Linear actuators and servo systems in automation setups
Its light viscosity makes it especially suitable for operations in cooler climates or precision systems where high flow rates and minimal resistance are critical.
| Brand/Product | Equivalent Grade | Key Difference | Why Choose Oila? |
|---|---|---|---|
| Gulf Western Superdraulic | ISO 32 | Similar zinc AW, good oxidation | Competitive price + local Melbourne stock |
| Mobil DTE 24 / Tellus S2 | ISO 32 | Premium zinc-free options available | Mrvell offers zinc-based for heavy AW |
| Valvoline Ultramax / Hi-Tec | ISO 32 | Wide availability | Oila focuses on bulk & fast delivery |
| Repco GV Oil | ISO 32 | Budget-friendly | Oila premium base oils + better specs |
Oila ISO 32 matches or exceeds most OEM requirements while offering better value for Australian businesses.
Marvell Hydraulic Oil ISO 32 meets or exceeds the following international specifications and performance standards:
ISO 11158 – HM (Anti-Wear Type)
DIN 51524 Part 2 – HLP Type
Eaton Vickers I-286-S / M-2950-S
Denison HF-0, HF-1, HF-2
Bosch Rexroth RE 90220
AFNOR NF E 48-603 HM
US Steel 127 / 136
Cincinnati Milacron P-68 (for VG 32 fluids)
These standards ensure reliable performance in a wide range of industrial and hydraulic systems.
| Property | Typical Value |
|---|---|
| ISO Viscosity Grade | 32 |
| Kinematic Viscosity @ 40°C | 32 mm²/s |
| Kinematic Viscosity @ 100°C | ~5.3 mm²/s |
| Viscosity Index | ≥98 |
| Pour Point | -30 °C |
| Flash Point | >210 °C |
| Density @ 15°C | 0.875 g/cm³ |
| Demulsibility (54°C) | Excellent |
| Foam Test Sequence I/II/III | Pass |
| Air Release @ 50°C | Excellent |
| Zinc Content | Present |
| Rust Test (ASTM D665 A & B) | Pass (No corrosion) |
These values are typical of current production and can vary slightly within normal manufacturing tolerances.
Store in a clean, dry, covered area away from direct sunlight, heat, and ignition sources
Keep containers sealed when not in use to avoid contamination from dust, moisture, and other fluids
Avoid mixing with other oils unless compatibility is verified
Use clean dispensing tools to maintain system cleanliness
Regularly monitor oil condition and system filters to maintain peak performance
Dispose of used oil in accordance with local environmental regulations and guidelines
Refer to the product's SDS (Safety Data Sheet) for full handling precautions
What does ISO VG 32 mean for hydraulic oil? ISO VG 32 indicates the oil's kinematic viscosity is approximately 32 mm²/s at 40°C. It's a medium-low viscosity grade, providing quick flow and responsive performance, especially suitable for cooler Australian conditions like Melbourne winters or precision systems with tight tolerances.
What machines and systems is Oila Hydraulic Oil ISO 32 recommended for? It's ideal for a wide range of mobile and stationary applications, including CNC machinery, injection moulding machines, hydraulic presses, forklifts, scissor lifts, small excavators, agricultural implements, power packs, actuators, and servo systems. Perfect where fast startup and efficiency in moderate temperatures are needed.
Does this oil contain zinc, and is it anti-wear (AW)? Yes – Oila ISO 32 uses zinc-based (ZDDP) anti-wear additives for superior protection against wear in pumps, valves, and other components. It meets anti-wear (AW) and HLP performance levels (DIN 51524-2 HLP).
How does ISO 32 compare to ISO 46 or ISO 68 in Australian conditions?
Is Oila ISO 32 compatible with other brands? It's compatible with most systems specifying DIN 51524-2 HLP or ISO 11158 HM fluids. Avoid mixing different viscosities or additive types if possible; a system flush is recommended when switching brands for optimal results.
ow often should I change the hydraulic oil? Change intervals vary: typically 2,000–4,000 operating hours for industrial systems, or annually. For mobile equipment, follow OEM guidelines (often 1,000–2,000 hours). Regular oil analysis (checking for contamination, oxidation, wear metals) extends life significantly.
What are the key performance benefits?
o you offer smaller sizes like 20L or 200L for ISO 32? Yes – we stock Oila Hydraulic Oil ISO 32 in 20L, 200L, and 1000L IBC. Check related products or our Hydraulic Oils category for all sizes and pricing.
Is free delivery available in Melbourne? Free metro delivery applies to many orders (check at checkout). Australia-wide shipping is available with competitive rates – contact us for bulk quotes.
Can this oil be used in environmentally sensitive or food-related applications? No – this is a standard industrial anti-wear fluid, not food-grade or readily biodegradable. For those requirements, ask about our specialized ranges.
This product hasn't received any reviews yet. Be the first to review this product!
