Gulf Western Superdraulic ISO 32 – Premium Hydraulic Oil for Industrial & Mobile Systems

Overview

Gulf Western Superdraulic ISO 32 is a high-performance anti-wear hydraulic oil developed using premium-quality base oils and an advanced additive system to meet the stringent requirements of hydraulic systems in industrial, agricultural, mining, and mobile applications. It offers excellent oxidation stability, anti-wear protection, corrosion resistance, and demulsibility, making it a reliable choice for systems requiring consistent performance under moderate to heavy loads.

Its ISO VG 32 viscosity grade makes it ideal for use in systems where lower-viscosity fluid is needed to ensure smooth hydraulic response, particularly in cold start environments or tightly controlled hydraulic equipment.

Key Features and Benefits

1. Advanced Anti-Wear Additive System

Formulated with zinc-based anti-wear additives, Superdraulic ISO 32 delivers outstanding protection for hydraulic pumps, valves, cylinders, and motors. It minimises metal-to-metal contact under high-pressure conditions, reducing wear and prolonging component life. The formulation ensures long drain intervals and lower maintenance frequency.

2. Excellent Oxidation and Thermal Stability

Gulf Western’s formulation resists oxidation even under elevated temperature conditions. This helps prevent the formation of sludge and varnish, which can restrict fluid flow, clog filters, or damage sensitive components. The thermal stability makes it suitable for systems with high-duty cycles or heat-sensitive controls.

3. Superior Demulsibility

Water contamination is a major threat in hydraulic systems, especially in mobile or outdoor environments. Superdraulic ISO 32 rapidly separates water from the oil phase, enabling quick drainage of moisture and minimising corrosion, rust, and emulsified sludge formation.

4. Outstanding Filterability

Cleanliness is critical for hydraulic fluid performance. This oil maintains excellent filterability, even in the presence of water or fine solid contaminants, helping systems stay clean and efficient. Reduced filter clogging also means fewer maintenance interventions and longer component lifespan.

5. Rust and Corrosion Protection

The formulation provides multi-metal corrosion inhibition, protecting both ferrous and non-ferrous system components from rust and chemical degradation. This is vital in environments exposed to condensation, humidity, or fluctuating temperature extremes.

6. Foam and Air Release Control

In hydraulic systems, foaming and trapped air can lead to erratic response, cavitation, and accelerated oxidation. This oil contains anti-foam agents and air release additives that allow entrained air to escape quickly, improving hydraulic precision and overall reliability.

7. Seal Compatibility

The oil is fully compatible with most common seal materials, including nitrile (NBR), Viton (FKM), and polyurethane. It helps prevent seal shrinkage or swelling that could lead to fluid leaks or contamination ingress.

Typical Physical Properties

Note: These values are typical and not specifications. Always refer to the product data sheet for batch-specific information.

Handling & Storage Advice

• Storage: Keep sealed containers in a cool, dry, and well-ventilated area away from direct sunlight and moisture. Ideal storage temperature is below 40°C.

• Handling: Always use clean and dedicated dispensing equipment to avoid cross-contamination with other fluids or particles. Avoid contact with skin and eyes.

• Contamination Prevention: Do not allow the oil to mix with water, dirt, or other lubricants. Store with lids tightly closed when not in use.

• Disposal: Used oil must be disposed of in accordance with local environmental regulations. Do not pour down drains, soil, or watercourses.

• Safety: Refer to the product Safety Data Sheet (SDS) for full guidance on safe handling, personal protective equipment, and emergency procedures.

Recommended Applications

Gulf Western Superdraulic ISO 32 is designed for use in:

• Industrial Hydraulic Systems: Including factory automation, presses, injection moulding machines, and fixed equipment.

• Mobile Hydraulic Systems: Cranes, forklifts, excavators, and agricultural machinery operating in varied outdoor conditions.

• Earthmoving Equipment: Such as bulldozers, loaders, and graders that require high fluid stability under demanding environments.

• Marine and Offshore Equipment: Where rapid air release and demulsibility are critical.

• Mining Operations: Involving high loads, frequent cycling, and heavy contaminants.

• CNC Machines and Tooling Systems: Where hydraulic accuracy and minimal thermal expansion are vital.

Meets or Exceeds Performance Standards

• Denison HF-0, HF-1, HF-2

• Vickers M-2950-S, I-286-S

• DIN 51524 Part 2 (HLP type)

• US Steel 127 and 136

• Cincinnati Machine P-68/P-69/P-70

• AFNOR NF E 48-603

Note: Always check your equipment manual to confirm compatibility with ISO 32 hydraulic fluids or zinc-based AW oils.

OEM Approvals and Equipment Compatibility

Gulf Western Superdraulic ISO 32 is compatible with a wide range of equipment from major OEMs, including:

• Caterpillar

• Komatsu

• Hitachi

• John Deere

• Case IH

• New Holland

• Volvo Construction Equipment

• Bobcat

• Atlas Copco

This makes it a highly versatile product suitable for use in mixed fleets and multi-brand workshops.